In Focus — a DCTUK microsite series. This edition: Burmatex® British carpet tiles. Shop all flooring at dctuk.com →
DCTUK In Focus Burmatex
Burmatex fitting service — nationwide UK installation
Supply & fit

Burmatex fitting service — nationwide UK installation

DCTUK supplies and fits the full Burmatex range across the United Kingdom, using employed fitting teams rather than subcontracted labour.

What the fitting service covers

Carpet tile is unforgiving about what is underneath it. A tile that telegraphs every ridge in the screed, or lifts at the corners because the slab was still wet, is almost always a subfloor failure rather than a product failure. The fitting service exists to close that gap.

  • Site survey and measurement — including relative humidity testing of the subfloor to BS 8203 / BS 5325 expectations before any adhesive decision is made
  • Uplift and disposal of existing floorcoverings, including adhesive residue removal
  • Latex screeding and subfloor preparation — smoothing compounds, damp proof membranes where the slab requires one, ply overlay on timber substrates
  • Installation by employed fitting teams to the manufacturer's recommended adhesive or tackifier system
  • Accessories — entrance matting, edge trims, nosings, skirting and barrier zone detailing
  • Out of hours and phased programmes for buildings that have to stay open — schools in half term, offices overnight and at weekends, healthcare in agreed possessions

What DCTUK commits to

Typical programmeAround 15 working days from first call to fitted floor
Site surveyFree
PricingFixed price, no hidden charges
Installation warranty12 months
Old flooringUplifted, removed and recycled
Design consultationFree
CoverageNationwide, United Kingdom

Clients include Starbucks, the NHS and Arsenal FC. Full details and a cost calculator are on the DCTUK Burmatex fitting service page.

How a typical project runs

1. Survey

A surveyor measures, tests subfloor moisture, records levels and thresholds, and identifies the preparation the floor will need. This is where costs get found — better here than on week three of the programme.

2. Quotation and take-off

Quantity take-off with a wastage allowance. Square tiles typically carry 5–7% wastage on a straightforward rectangular floor; plank layouts and herringbone need more, often 10–12%, because of the cutting pattern. Attic stock is quoted separately and we recommend taking it.

3. Preparation

Uplift, disposal, adhesive residue removal, screeding. Screed needs curing time — allow for it in the programme rather than compressing it.

4. Installation

Tiles are laid to the manufacturer's recommended layout: monolithic, quarter-turn, brick bond, ashlar or herringbone depending on range and design intent. Arrow direction on the tile back is followed; this matters more on directional loop constructions than people expect.

5. Handover

Clean down, snagging, and handover of attic stock and maintenance guidance.

Tile and plank layout options

MonolithicAll tiles laid in the same direction. Gives the most seamless, broadloom-like appearance. Least forgiving of individual tile replacement and of shading.
Quarter-turn (checkerboard)Each tile rotated 90° from its neighbour. The default for most commercial installations — hides shading, tolerates replacement, and is the most forgiving layout there is.
Brick bondRows offset by half a tile. Common with square tiles for a softer grid; standard with planks.
AshlarPlank rows offset by a third or a quarter. Strongly linear — good for corridors and for giving direction.
HerringbonePlanks at 90° to each other in a zigzag. Highest visual impact, highest wastage, highest labour. Worth it in a reception, rarely worth it across a floorplate.

Keeping a Burmatex floor looking right

Carpet tile maintenance is mostly about stopping soil getting onto the floor in the first place, and then removing dry soil before it becomes wet soil.

  • Barrier zones. The single highest-return intervention. A properly sized barrier — a minimum of two strides in each direction of travel, more at entrances exposed to weather or vehicle traffic — removes the majority of tracked-in grit before it reaches the main floor. Grimebuster is engineered specifically for this duty.
  • Vacuum daily in circulation, weekly elsewhere. Dry soil is abrasive; it cuts fibre. Wet soil stains. Getting the dry soil out before it gets wet is most of the job.
  • Spot clean immediately with the appropriate cleaning agent. Solution dyed nylon ranges (Tivoli, Go-To, Alaska, Origin, Infinity) tolerate aggressive cleaning including dilute bleach because the colour is in the polymer, not on it.
  • Periodic deep clean by low-moisture encapsulation or hot water extraction depending on construction and soiling level.
  • Rotate tiles at year five to seven where the design allows — swap lightly-used tiles from under furniture into worn traffic lanes.

Frequently asked questions

Does DCTUK fit Burmatex carpet tiles nationwide?

Yes. DCTUK operates a nationwide Burmatex fitting service across the United Kingdom, using employed fitting teams. See the fitting service page.

Can you fit while our building stays open?

Yes. Out of hours, overnight, weekend and phased programmes are standard — schools during half term, offices at weekends, healthcare in agreed possessions.

Do you remove the old flooring?

Yes. Uplift, adhesive residue removal and disposal of existing floorcoverings are included in the fitting service, quoted at survey.

How much wastage should I allow?

Typically 5–7% for square tiles on a straightforward rectangular floor, rising to 10–12% for plank and herringbone layouts. Complex shapes and heavy cutting around columns and fixed furniture increase it further.

Should I buy attic stock?

Yes — one to two boxes per colourway from the original production batch, stored flat and dry on site. It is the cheapest insurance in the fit-out, and it is what makes the modular replacement argument real years later.

Designed and made in Yorkshire

Burmatex has manufactured at Victoria Mills in Ossett, West Yorkshire since 1967, on a site the business has occupied since 1912. Design and production sit side by side under one roof — and every range on this site is available for export.

The British story
DCTUK In Focus

burmatexcarpettiles.net is published by DCTUK, a UK commercial and residential flooring supplier. It is one of a series of In Focus microsites covering the brands we stock in depth. Burmatex® is a registered trademark of its owner; we are a retailer, not the manufacturer.

Visit dctuk.com