In Focus — a DCTUK microsite series. This edition: Burmatex® British carpet tiles. Shop all flooring at dctuk.com →
DCTUK In Focus Burmatex
Carpet tiles for healthcare
Specification guide

Carpet tiles for healthcare

Carpet has a real and defensible place in healthcare buildings — but not everywhere, and the boundary is worth getting right.

Where carpet belongs — and where it does not

The honest version first. Carpet is not appropriate in clinical areas where bodily fluids are expected, in treatment and procedure rooms, in wet areas, or anywhere local infection control policy specifies an impervious, welded, coved sheet floor. That is not a matter of product quality; it is a matter of clinical policy, and it is not negotiable.

Carpet is appropriate, and frequently preferable, in:

  • Waiting areas and reception
  • Administrative and office areas
  • Staff rooms and rest areas
  • Corridors outside clinical zones
  • Mental health units, where acoustic comfort and a domestic feel are therapeutic objectives
  • Care homes and residential settings, in bedrooms and lounges
  • Consultation and counselling rooms, where acoustic privacy matters

Always confirm against the trust's or operator's own flooring policy and infection prevention and control guidance before specifying.

Cleanability and solution dyed nylon

Where carpet is permitted, cleanability is the specification driver. Solution dyed nylon is the answer: pigment is added to the polymer melt before the fibre is extruded, so colour runs through the filament rather than sitting on the surface. The practical consequence is that the fibre tolerates aggressive cleaning agents, including dilute bleach solutions, without losing colour.

Burmatex solution dyed nylon ranges: Tivoli, Tivoli Mist, Go-To, Alaska and Origin.

The modular advantage matters more here than anywhere. A contaminated tile is lifted, disposed of and replaced with attic stock in minutes. The same incident on a broadloom carpet is a patch repair that shows, or a room closure.

Designing for soil concealment

Healthcare buildings are open twenty-four hours and cleaned to a schedule. Between cleans, the floor has to be forgiving.

Tonal flecked designs outperform plains substantially. Tivoli Mist exists for exactly this: a two-colour yarn blend that breaks up the surface so dropped crumbs, damp footprints and daily traffic do not read the way they do on a flat plain. Multilevel loop designs like Dapple and Balance Ratio do similar work with texture.

Avoid very light plains in any public-facing healthcare area. They photograph beautifully and they are a maintenance liability from the first week.

Dementia-friendly and neurodiverse-inclusive design

There is well-established design guidance on flooring in dementia care, and it is specific:

  • Avoid strong pattern, high contrast speckle and bold geometrics. They can be misread as steps, holes or objects on the floor, causing hesitation, altered gait and falls.
  • Avoid sharp tonal changes between adjacent floor areas for the same reason — a dark threshold strip can read as a void.
  • Do use tonal contrast between floor and wall to define the room boundary clearly, typically a difference of 30 points in light reflectance value.
  • Avoid shiny or highly reflective finishes, which can read as wet.

Subtle tonal designs like Balance Ratio, Threads Plain and Snowfall suit these settings. Strong geometrics do not.

Acoustics, comfort and falls

Noise is a documented problem in hospital environments, affecting patient sleep, recovery and staff stress. Carpet meaningfully reduces impact noise from footfall, trolleys and equipment movement in the areas where it can be used.

It also reduces injury severity in falls relative to a hard floor — relevant in care homes, elderly care and mental health settings, and increasingly part of the falls strategy rather than just the flooring specification.

Where trolley movement is heavy, specify fibre bonded — Velour Excel or Academy — and use a permanent adhesive rather than a tackifier where lateral shear is severe.

Frequently asked questions

Can carpet tiles be used in hospitals?

In non-clinical areas — waiting rooms, reception, offices, staff areas, corridors outside clinical zones, mental health units and care settings — yes, and they are widely specified. In clinical areas where bodily fluids are expected, in treatment rooms and in wet areas, impervious welded sheet flooring is required. Always confirm against the operator"s own infection prevention and control policy.

Which carpet tiles are easiest to clean in healthcare?

Solution dyed nylon ranges, because the pigment is in the polymer rather than on the fibre surface, so they tolerate aggressive cleaning agents including dilute bleach without colour loss. Tivoli, Tivoli Mist, Go-To, Alaska and Origin are solution dyed.

What flooring design is best for dementia care?

Subtle, low-contrast tonal designs without strong pattern, speckle or sharp tonal changes between areas, which can be misread as steps or holes. Maintain clear tonal contrast between floor and wall to define the room boundary, and avoid reflective finishes.

Is carpet safer than hard flooring for falls?

Carpet reduces injury severity in falls relative to hard flooring, which is why it is commonly specified in care homes, elderly care and mental health settings. It is one component of a falls strategy, not a substitute for one.

Designed and made in Yorkshire

Burmatex has manufactured at Victoria Mills in Ossett, West Yorkshire since 1967, on a site the business has occupied since 1912. Design and production sit side by side under one roof — and every range on this site is available for export.

The British story
DCTUK In Focus

burmatexcarpettiles.net is published by DCTUK, a UK commercial and residential flooring supplier. It is one of a series of In Focus microsites covering the brands we stock in depth. Burmatex® is a registered trademark of its owner; we are a retailer, not the manufacturer.

Visit dctuk.com